Jabsco Impeller Guide

You will need to know the Diameter, Depth and Shaft Size of your impeller, as well as the number of blades or fins on your impeller.
If you know these details then please scroll down this page and input your impeller details.

STEP 1 :
Select Impeller Diameter

STEP 2 :
Select Impeller Depth

STEP 3 :
Select Number of Blades or Fins

STEP 4 :
Select Shaft Diameter

STEP 5 :
Select Shaft Type
Check off the shaft type of your impeller in the left hand column below.

Select

STEP 6 :
Select Impeller Material :

* See beolow for compatibility Information.

JABSCO flexible impellers are available in the following materials:
1. NEOPRENE is the standard impeller material used in mostflexible impeller pumps. It offers a wide range of chemicalresistant properties.Temperature range: 45°F to 180°F.
2. NITRILE impellers offer compatibility with oil products. Ithandles a wide range of oils, oil and water emulsions, dieselfuel, lower fraction hydrocarbons, kerosene, lubricating andmachine cutting oil. Lower temperatures affect primingability and performance characteristics. Generally, nitrileperformance is 10% below that of neoprene.Temperature range: 50°F to 180°F.
3. VITON impellers are recommended when pumpinghydrocarbons, solvents and severely corrosive chemicals.Viton is not recommended for low temperature or highpressure applications.Temperature range: 60°F to 180°F.

>> <<